Slim Boot Dryer

Extra thin boot dryer for rail system
Product information
EXTERNAL DIMENSIONS:
length: 1500 mm / 4'11''
width: 500 mm / 1'8''
height: 2420 mm / 7'11''

CAPACITY PER RACK:
44 pairs of boots

DETAILED DESCRIPTION:
• Horizontal arrangement of the boots for even higher storage capacities in a narrower construction
• Intelligent electronic control via a modern screen
• Programmable drying times, air temperature and operation modes
• Durable components designed for permanent operation
• energy-saving drying tubes with nozzles that open only of a boot is on the tube
• Very high efficiency of fans and heaters
• Optional: Integration of a disinfection unit
• Optional: Individually designable wide front-panels for a customized look

The prices are quoted ex-factory and excluding packaging and assembly costs.
Technical Data
Boot pairs: 44
Height: 2420 mm
Length: 1500 mm
Storage: boots
Supply voltage & power hot air: 3 x 400 V / 7150 W
Width: 500 mm

 

The SLIM BOOT DRYER offers all the advantages that you know from our proven boot dryers. The key difference is that you get the same storage and drying capacity in a much narrower construction. Thanks to the intelligent construction, the width of the boot dryer is limited to 50 cm, which saves a lot of space in the ski rental and depot.

Technical data

Dimensions Capacities1 Power consumpt.2
1500 x 500 x 2420 mm 44 550/7150 W
1800 x 500 x 2420 mm 55 550/7150 W
2000 x 500 x 2420 mm 66 550/7150 W
2400 x 500 x 2420 mm 77 550/7150 W
3000 x 500 x 2420 mm 99 550/7150 W
4000 x 500 x 2420 mm 132 550/7150 W

1) pairs of boots     2) without heating / with heating

Voltage: 230 V / 3x400 V (without heating / with heating)

HORIZONTAL STORAGE

The horizontal arrangement of the drying bars means that even more ski boots can be efficiently stored and dried in a particularly narrow construction.

INDIVIDUAL CONTROL

With a few buttons on the control panel you can set the operating mode of each segment, its air temperature and drying times. The drying nozzles are equipped with a spring that only opens the air supply when there is a boot on the bar. This makes the boot dryer particularly energy-efficient.

Your benefits:

Attractive design, high drying efficiency and excellent ergonomics combined

Extremely space-saving design with a width of only 50 cm and high storage capacity

high-quality components for continuous operation

High drying and energy efficiency due to the automatic opening and closing mechanism of the drying bars

Easy control of operating mode, air temperature and drying time on the intuitive touch panel

Optional: steel tray to catch dripping water

Downloads

Top Line Catalogue

Your contact person

Frederik Klingenstein

Sales Manager
Tel.: +49 7309 875 - 32
Mail: fklingenstein@reichmann.com

All contact persons

 

accessories

Stainless steel rail
2 mm; 2 m long
2 meters stainless steel rail in 2mm material thickness for racks up to 2000 mm long.

After logging in, the trade prices are visible.
Stainless steel rail connector
for storage systems
Base Rail - Connection

After logging in, the trade prices are visible.
Stainless steel rail
2 mm; 1 m lang
1 meter stainless steel rail with 2 mm material thickness for racks up to 2000 mm long.

After logging in, the trade prices are visible.
Stainless steel rail - ending
for storage systems
Rail end piece to finish the rail system for racks.

After logging in, the trade prices are visible.