SF-4

The Reichmann SF-4 service robot supports ski rentals and sports shops with various amounts of service work (1.500 to 40.000 skis or snowboards) optimally. For the individual requirements, four different modules are available which can be chosen separately or in combination. Thus, the robot is individually customizable and offers an optimal use of space.

The SF-4 combines simple handling, shortest throughput times, low maintenance costs and perfectly reproducible grinding results.

[Translate to EN:] Autonome Beladung aus flexiblem Ski-Transportwagen

PAIRWISE SKI INPUT AND OUTPUT

The clever ski input and output ensures comfortable, ergonomic and efficient work. At the same time up to 8 skis can be loaded and unloaded automatically (with a ski length of up to 2.15m). This allows you to carry out ancillary activities at the same time, which saves you a lot of time.

NEW AUTONOMOUS LOADING MAGAZINE

With the brand new loading magazine for the SF-4 RACE, the loading and unloading is done completely automatically from a flexible ski transport carriage. Fill the carriage directly at the service counter, drive it to the service robot and dock it to the machine - that's all your service staff has to do. Use the time for other important activities!

High time savings for your service staff

[Translate to EN:] Reichmann SF-4 mit autonomem Belademagazin

Save time-consuming pairwise or even piecewise loading and unloading of the skis at the machine! Simply place the skis from the service counter or various shops directly in the mobile transport carriage. The filled carriage can be driven directly to the machine and docked, which eliminates time-consuming reloading. After docking, the service robot will do all the work by itself - including the pairwise loading of the skis into the machine and the return into the carriage. Your service staff can take care of other important tasks during this time. Benefit from an enormous time saving and get Reichmann service quality paired with a high throughput! The flexible carriage is available as a one-sided version for 8 pairs of skis or as a two-sided version for 16 pairs of skis.

INTUITIVE OPERATION

The machine settings can be made intuitively via the new, extra large touch display. The selection of stored sequence programs ensures consistently good grinding results independently of the operator. For the base structure, a large portfolio of stored structures can be used.

INNOVATIVE TRANSPORT SYSTEM

With the special transport system the winter sports equipment is fixed in eight places over the whole length. This means that skis and snowboards can be ideally picked up by the machine and transported via the grinding modules, regardless of their surface, length and width.

PRACTICAL FILTER SYSTEM

The easily accessible filter can be changed quickly and effortlessly. Optionally, an automatic filter system is available.

[Translate to EN:] Serviceautomat SF-4 mit Steinmodul

One module

SF-4 2S RACE: double stone module for Ski
SF-4 S RACE: module with wide stone for Ski & Boards

[Translate to EN:] Serviceautomat SF-4 mit Stein- und Kantenmodul

Two modules

SF-4 2S-K RACE: double stone module for Ski and edge module
SF-4 S-K RACE: module with wide stone for Ski & Boards and edge module

[Translate to EN:] Serviceautomat SF-4 mit Doppelstein- und Katenmodul

Three modules

SF-4 2S-2S-K RACE: two double stone modules for Ski and edge module

Four modules

STONE MODULE FOR SKI & BOARDS

On the 350mm wide stone, a wide variety of structures for skis and snowboards can be grinded. This gives the sports equipment optimum gliding properties and guarantees satisfied customers. When working on skis, high-efficiency pre-grinding and finishing structures can be used in parallel.

STONE MODULE FOR SKI

The two 165 mm wide grinding stones with matching dressing systems enable extremely efficient treatment of the skis. Thanks to the two parallel grinding stones, pre-grinding and structure grinding of the skis takes place in just one operation. This means significant time savings compared to other service robots.

EDGE MODULE FOR SKI & BOARDS

Thanks to the HQT edge technology, you will receive burr-free and ready-to-race skis and snowboards in the shortest time while at the same time being gentle on the materials. A particularly wide range of winter sports enthusiasts can be served with regard to driving skills (from beginners to race-oriented riders) and ski types (freeride, carving, all-mountain, race).

[Translate to EN:] Reichmann SF-4 Wachsmodul

WAXING MODULE FOR SKIS

With the new waxing module, you cover a further service step in the robot. Waxing and brushing is done in one machine run. Save yourself time-consuming, manual waxing and get ready-to-race skis directly out of the machine.

	one module	two modules	three modules	three modules (with waxing module)	four modules (with waxing module)
Dimensions (L x W x H) in mm	4960 x 1743 x 2050 mm / 16'3'' x 5'9'' x 6'9''	5840 x 1745 x 2050 / 19'2'' x 5'9'' x 6'9''	6720 x 2185 x 2050 / 22'1'' x 7'2'' x 6'9''	6720 x 2185 x 2050 / 22'1'' x 7'2'' x 6'9''	7600 x 2185 x 2050 / 24'11' x 7'2'' x 6'9''
Connecting voltage	400 V / 3Ph / 50 Hz	400 V / 3Ph / 50 Hz	400 V / 3Ph / 50 Hz	400 V / 3Ph / 50 Hz	400 V / 3Ph / 50 Hz
Connecting power in kW	5.5	8	12.5	17.5	21.5

Maximal cycle time	60 Ski/h
Profitable with an amount of service work per season of	1,500 – 24,000 skis or boards
Processing of ski and board lengths of	0.9 – 2.15 m