Waxing Robots Base Edge Binding

Space saving combi package – wide stone and belt
The PROFI 4 is a combined stone-belt-tuning machine that meets all requirements for fast and efficient tuning. Based on the two in-line aggregates stone and belt, which are operable from one side, the machines can be placed directly against the wall to save space. Equipped with a 350 mm wide stone The Profi 4 can handle skis and snowboards with ease. Furthermore the split structure option on the stone enables a one step pre-grinding and finish structure, without wasting time or material. The rubberized contact roll on the belt side adapts to concave and convex shapes of boards while protecting the edge angles. The pneumatic controls on the Profi 4 give the user many options for tuning snowboards. The Profi 4 also has power saving capabilities built into the machine, making it an environmentally friendly machine.

Pneumatic controls and pressure regulation
With one hand the machine operator can switch the feed wheel position from stone to belt and back, with only the push of a button. The feed wheel is easily split into selections to adjust the pressure on the board. This helps the operator put pressure on the board exactly where it is needed. Grinding convex or concave boards and skis will no longer be an issue.

Reproducible structures
The operation and adjustment of the PROFI 4 is carried out via over sized keys on the "easy-to-use"-panel. The computer control enables the alignment of infinite structures, which you can also develop using our online platform “PatRich” without wearing of the stone and dresser. With 20 preset programs one can adjust boards and skis quickly and easily for any snow conditions and achieve consistent results. This assures consistent quality to from your workshop and certain customer satisfaction.

Cleaning and maintenance
Changing the belt is effortless with the pneumatic belt tension system. Cleaning of the machine is also quite easy largely due to the design of the machine. The sloped interior of the machine provides for full accumulation of the grinding material in the tank. A clean machine means less costs for spare parts, as well as costs of time spent cleaning and repairing the machine.

A good investment for the future
The Profi 4 stands for foresighted technique that meets all requirements for the future. Moreover, with an investment into machine quality “Made in Germany” you can save costs due the fact that your need for spare parts will be reduced. The Profi 4 is a low consumption machine requiring small amount of consumables and saving you and the customer money.